A new tricrystalline triblock terpolymer by combining polyhomologation and ring‐opening polymerization. synthesis and thermal properties

New tricrystalline triblock terpolymers, polyethylene‐block‐poly(ε‐caprolactone)‐block‐poly(L‐lactide) (PE‐b‐PCL‐b‐PLLA), were synthesized by ROP of ε‐caprolactone (CL) and L‐lactide (LLA) from linear ω‐hydroxyl polyethylene (PE‐OH) macroinitiators. The linear PE‐OH macroinitiators were prepared by C1 polymerization of methylsulfoxonium methylide (polyhomologation). Tin(II) 2‐ethylhexanoate was used as the catalyst for the sequential ROP of CL and LLA in one‐pot polymerization at 85 °C in toluene (PE‐OH macroinitiators are soluble in toluene at 80 °C). ¹H NMR spectra confirmed the formation of PE‐b‐PCL‐b‐PLLA triblock terpolymers through the appearance of the characteristic proton peaks of each block. GPC traces showed the increase in the number average molecular weight from PE‐OH macroinitiator to PE‐b‐PCL, and PE‐b‐PCL‐b‐PLLA corroborating the successful synthesis. The existence of three crystalline blocks was proved by DSC and XRD spectroscopy. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2450–2456     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Preparation and in vitro/in vivo evaluation of anastrozole reservoir‐type intravaginal ring

This report details the preparation of anastrozole (ATZ) reservoir‐type intravaginal ring (IVR) and the detection of the concentration of ATZ in beagle dog plasma by liquid chromatography–tandem mass spectrometry (LC–MS/MS). An ATZ reservoir‐type IVR which included ATZ silicone elastomer core and a nonactive silicone layer was manufactured by reaction injection moulding at 80°C for 20 min. An in vitro release experiment was performed under sink conditions and the samples were determined by high‐performance liquid chromatography. A bioanalytical method was developed and validated for determination of ATZ in beagle dog plasma for IVR development. The analytical method consisted of the extraction of plasma samples and determination of ATZ by LC–MS/MS using buspirone as the internal standard. Separation was achieved on a Kinetex‐C₁₈ 110A column (3 × 30 mm, 2.6 μm, Phenomenex) using step‐gradient mobile phase and an isocratic flow rate consisting of formic acid. Protonated ions formed by a turboion spray in the positive mode was used to detect the analyte (ATZ) and internal standard. The MS–MS detection was performed on a triple quadrupole mass spectrometer equipped with electrospray ionization source. The mass spectrometer was operated in the multiple reaction monitoring mode. The mass transition ion‐pair was followed as m/z from 294.10 to 225.08 for anastrozole and m/z from 386.23 to 122.11 for buspirone. The results proved that the correlation between in vitro and in vivo analyses was relatively good.     

Sterically Constrained Bicyclic Phosphines: A Class of Fascinating Compounds Suitable for Application in Small Molecule Activation and Coordination Chemistry

Bicyclic phosphines with two annulated, electronically unsaturated five-membered heterocycles are available through facile routes. In most cases, their phosphorus atoms are bound to heteroatoms such as oxygen or nitrogen (PN₃ or PN₂O), whereas homoleptic coordination by three sp²-hybridized carbon atoms has been reported only recently. Steric strain causes unique reactivity. Oxidative addition of halogens, N−H or O−H bonds have afforded phosphoranes as valuable materials for secondary processes. Ring opening was identified as an important step for the understanding of these reactions and has been observed experimentally with a diphosphorus-based ring system. A PH₂ derivative has been considered as a model system for small molecule activation, and hydrogen transfer to a diazo compound was observed experimentally. Several of these phosphines are excellent ligands for the coordination of transition-metal atoms. The very bulky PC₃ compound has a basicity similar to that of PPh₃ and may allow the synthesis of complexes with unusually low coordination numbers at the metal atoms. These phosphines found recently renewed interest as promising reagents in various secondary transformations such as the activation of σ-bonds or in coordination chemistry.     

Aryl vinyl cyclopropane Cope rearrangements

While the divinyl cyclopropane Cope rearrangement is well-known, and has been broadly applied in synthesis, examples of the aryl vinyl cyclopropane Cope rearrangement are less common and generally limited in scope or reaction yield. The aryl vinyl cyclopropane Cope rearrangement gives access to the benzocycloheptene scaffold, which is present in a variety of naturally occurring and medicinally relevant products. Herein we report a method to obtain either of two regioisomeric benzocycloheptene products via an aryl vinyl cyclopropane Cope rearrangement, featuring additive-controlled regioselectivity. Mechanistic studies indicate a dynamic equilibration of cyclopropane stereoisomers, followed by rearrangement of the cis diastereomer.